ホーム > ブログ> Application of TFC Series Soil Nutrient Tester IV - Determination of Total Amount of Humic Acid

Application of TFC Series Soil Nutrient Tester IV - Determination of Total Amount of Humic Acid

April 03, 2023

(Sodium pyrophosphate extraction - potassium dichromate oxidation colorimetric method, this method is for reference only)


one. Reagent configuration:



1: concentrated sulfuric acid: (analytical purity 98%).



2: 0.8mol/L 1/6 potassium dichromate solution preparation: Potassium dichromate 40g dissolved in one liter of water.



3: Preparation of sodium pyrophosphate extract: 15 g of sodium pyrophosphate and 7 g of sodium hydroxide are dissolved in one liter of water.



4: 0.5% - C standard solution preparation: Weigh 1.370g glucose in a 100ml volumetric flask and make up to volume with water.



two. Steps:



1: Preparation of test solution: Weigh air-dried sample (over 0.25mm sieve) 0.5000g (accurate to 0.0002g) into a 300ml flask, add 150ml of sodium pyrophosphate soaking agent into a small funnel, Heat extraction in boiling water bath for 2 hours. Shake frequently during heating.organic synthsis, After extraction, remove the flask and cool. Transfer all to a 200 ml volumetric flask, shake well and let stand for clarification.



2: Measurement: Aspirate 5.00 ml of extract solution in a 100 ml volumetric flask, add 0.8 mol/L potassium dichromate solution 5 ml and concentrated sulfuric acid 15 ml (add slowly), heat and oxidize in a boiling water bath for 30 minutes, remove, and cool At room temperature, add water to the mark and shake it.

Cololess liquid



3: The same standard as the above procedure is used as the standard solution and blank solution: Aspirate 5.00 ml standard solution in a 100 ml volumetric flask and add 5 ml of extractant.'chemical raw material' In another blank bottle, only 5 ml of water and 5 ml of extractant were added, both of which were added with the same oxidant as the aforementioned sample bottle, heated together with the sample bottle in a boiling water bath, cooled, and then added with water to a constant volume.



4: Colorimetric measurement on the instrument.






three. Calculation of results:



Colorimetric measurement of carbon content in the test solution / 5 × 200ml



Total humic acid (%) = ------------------―――――――――――― × 100



Sample weight (g) × 1000 × humic acid carbon content






Peat humic acid: 0.58 brown coal humic acid: 0.64



Weathered coal humic acid: 0.67









Hangzhou Top Instrument Co., Ltd.

Room 806, Songdu Building, No. 69 Wangjiang Road, Hangzhou

Phone 86062776

fax

お問い合わせ

Author:

Mr. fengyi

Eメール:

chemtarget@gmail.com

Phone/WhatsApp:

+8613548425599

人気商品
You may also like
Related Categories

この仕入先にメール

タイトル:
イーメール:
メッセージ:

Your message must be betwwen 20-8000 characters

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

送信